• FiberPlex FP101EBT PoE Media Converter




Features
  • Extended Operating Temperature - -40 to 75°C (-40 to -167°F) ambient temperature range.
  • Flexible Mounting Options - Wall mount, DIN rail or desktop.
  • Rugged - Meets tough EN60068 standards for Free Fall, Shock and Vibration.
  • Plug and Play - Auto sensing network speeds and PoE compliant power negotiation makes this product incredibly easy to use.
  • Link Fault Pass-Through (LFP) - If the copper signal is lost or disconnected, the fiber signal will turn off. If the fiber signal is lost or disconnected, the copper port will turn off.
  • Full PoE Support - Supports all current options for standards-based PoE including 60W uPoE and 95W Power over HDBaseT (PoH).
  • TAA Compliant - Top notch quality and reliability with local support.

Patton’s FP101E/BT90 converts singlemode or multimode fiber to a copper Ethernet signal. With the built-in high power PoE (Power over Ethernet) injector and a local power source, you can easily and reliably extend both power (90 watts/high power PoE) and 10/100/1000 Mbps Gigabit Ethernet to any PoE enabled end point including devices such as IP security cameras, IP speakers, Digital Signage, VoIP phones, Wireless Access Points, POS kiosks, BACs, PLCs and more.


Because Gigabit Ethernet over Cat5e/6 cables is limited to about 100 meters (328 feet), using fiber as a backhaul allows for a massive increase in distances. SFP options for multimode can reach up to 2 km (1.24 miles) and singlemode options can range as far as 120 km (74 miles). In addition to the reach, you get Fiber’s superior immunity to noise and, harmful transients (surges).


The FP101E/BT90 is housed in an IP30 rated DIN rail, wall-mount enabled enclosure and has a wide operating temperature of -40 to 75C. Its rugged design and wide temperature range makes it an ideal media converter for industrial or harsh environments.

The Fiberplex 101E/BT90 is very simple to use, completely plug and play. LEDs will make it clear when power is detected on the power inputs and when PoE is being delivered. This is a PoE compliant device so the amount of power is negotiated automatically by the injector. Should the device you are connecting to not be PoE enabled, the FP101E/BT90 will detect this and not pass power to the connected device.


Part Number
FiberPlex FP101E/BT90 Industrial 10 Gigabit Media Converter with 90W (802.3bt) PoE Injector

FiberPlex FP101EBT PoE Media Converter

  • Brand: Patton Electronics
  • Product Number: FP101EBT
  • Product Code:
  • Availability: Please call

Available Options


Related Products

SmartNode VOIP Routers by Patton Electronics

SmartNode VOIP Routers by Patton Electronics

Over and against a simple VoIP gateway, another benefit with a VoIP router is this: a VoIP router ..

FiberPlex by Patton Electronics

FiberPlex by Patton Electronics

The Global Leader in Secured Digital Communications Trusted by leaders in: Defense & Intel..

FiberPlex FP1004E by Patton Electronics

FiberPlex FP1004E by Patton Electronics

FiberPlex FP1004E TD Industrial Switch 6 Port 10/100/1000, 4 Copper + 2 SFP Cage; industrial packa..

FiberPlex FP102EBT PoE Media Converter

FiberPlex FP102EBT PoE Media Converter

Features Extended Operating Temperature - -40 to 75°C (-40 to -167°F) ambient tempera..

CopperLink CL141EBT PoE Injector

CopperLink CL141EBT PoE Injector

Industrial gigabit high power PoE injector with voltage booster accepts 24–56 VDC and boosts..

CopperLink CL241EBT PoE Injector

CopperLink CL241EBT PoE Injector

CopperLink CL241E industrial 90W Gigabit PoE splitters allow non-PoE-enabled devices to oper..

CopperLink CL1100E PoE Extender

CopperLink CL1100E PoE Extender

CopperLink CL1100E Industrial Grade Power-over-Ethernet (PoE) Ethernet Extender | up to 3300..

Tags: Patton Electronics, FiberPlex FP101E/BT90, poe media converters, fp101ebt, fp1013